Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Repair in Quincy: What to Know First
If you own an Olympia Chimney product in Quincy and the masonry around it is failing, we can fix it. When you call Top Hat Chimney, you’ll get a straight answer about what’s actually wrong, how much it’ll cost, and whether it can wait. We’re an independent Olympia Chimney service provider - not a manufacturer rep - so we call it like we see it. We typically complete most repointing and flashing repairs on Olympia Chimney systems in a single visit. Call (781) 277-4630 for a free estimate. Wendell has spent the better part of two decades driving these Quincy streets and climbing onto roofs from Merrymount all the way up to the quarries, and he knows how Quincy weather treats a chimney.
How Olympia Chimney Products Fail - and How We Fix Them
- Flashing failure at the roofline on Olympia Chimney stainless liners. The liner itself holds up fine, but the flashing and storm collar take a beating from Quincy’s coastal freeze-thaw cycles. Water gets in at the roofline, rots the sheathing, and runs down the interior wall. We cut out the old flashing, install new base and counter flashing with proper pitch, and seal it with a high-grade urethane caulk that stays flexible through New England winters.
- Mortar joint deterioration on Olympia Chimney prefab chase tops. Homes in Wollaston and North Quincy built in the 1980s and 1990s often paired Olympia Chimney pipe with a masonry chase. The chase absorbs water, the mortar joints crumble, and you see sandy grit at the base. We repoint with mortar matched to your existing joint profile, not whatever mix is on sale at the supply house. On an Olympia Chimney chase, the weaker mix actually fails faster because the metal cap conducts heat differently than full masonry.
- Spalling brick on older Quincy colonials with Olympia Chimney upgrades. Homeowners retrofit a modern Olympia Chimney liner into a 1920s brick chimney, then wonder why bricks are flaking off. The liner pushes hot exhaust up faster than the old brick can handle, and the rapid thermal cycling causes the brick faces to pop. We repair spalled brick, then waterproof the exterior with a vapor-permeable sealant so the brick can still breathe. That’s the part most people skip, and then they call us back in five years for the same repair.
- Crown cracks that let water behind the Olympia Chimney termination. The cap and crown look fine from the ground, but hairline cracks in the concrete crown act like a funnel. Water follows the cracks, seeps into the masonry, and pools at the liner connection. We rebuild crowns with a proper overhang and drip edge, then confirm the Olympia Chimney cap still seats correctly. A crown that doesn’t overhang the brick by at least two inches will always leak, no matter what brand of liner sits underneath it.
- Missing or enlarged chase top panels on Olympia Chimney air-cooled systems. We see chase covers rust through in as little as six years near Houghs Neck and Squantum, where salt air is a constant. When the chase cover rusts, rain pours straight down the outside of your Olympia Chimney pipe. We replace the cover with stainless steel, not galvanized, and that’s a fix that outlasts the original by a wide margin.
Our Olympia Chimney Chimney Repair Process
- 1
You call, a live person answers. No voicemail tree, no call center. We hear what’s going on, we give you an honest first take, and we schedule a time that works.
- 2
We show up with the right tools. Wendell or one of his crew arrives in uniform with a real arrival window, and we call if that window slips. We bring our own ladder, our own scaffold where it’s needed, and our own camera.
- 3
We inspect the whole system, not just the complaint. We run a camera up the flue, we check the crown, the flashing, the brick, and the Olympia Chimney components. If it doesn’t need cleaning, we’ll tell you that too.
- 4
You get a written price before any work starts. The number we quote on the phone is the number on the invoice. If we find something else that needs doing, we stop, we show you what we saw, and we tell you if it can wait.
- 5
We do the repair with the right parts. On Olympia Chimney jobs, we use OEM parts where the warranty or fit requires it, and quality aftermarket parts where they perform just as well and cost less. We’ll explain the difference and let you decide.
- 6
We test it, clean up, and put our name on it. We verify the fire draws properly, we leave the roof and yard cleaner than we found it, and we hand you a written 90-Day Done Right Promise. If something isn’t right, one call brings us back.
What Olympia Chimney Chimney Repair Costs in Quincy
Small repointing jobs on an Olympia Chimney system start around $400. Full flashing replacement runs $600 to $1,100 depending on chase height and roofline access. Crown rebuilds typically land between $800 and $1,500. Spalling brick repair can range from $500 for a few replaced bricks to $3,000 or more for a partial rebuild. Waterproofing alone on an average Quincy home runs $300 to $600. What moves the price is access: a steep roof on a seaside single-family in Adams Shore costs more than a straight ladder job off a driveway in Wollaston. You’ll get a free estimate before anything is scheduled, and we’ll never push a repair you can safely put off.
Why Quincy Homeowners Call Top Hat Chimney for Olympia Chimney Work
Top Hat Chimney is locally owned and owner-operated. Wendell Pike founded this business in 1999, and his name and license number are published for anyone to verify. You’ll see him again around Quincy - at the hardware store, on the next block, at the harbor. That matters when you’ve been quoted one price by a national outfit and told another by the tech who showed up. Our 90-Day Done Right Promise is stamped on every job in writing. We answer the phone around the clock with a live person, and it may well be Wendell himself. If you have a Olympia Chimney liner and the repair also involves a DuraFlex, HeatShield, or Gelco component, we service those too. We don’t have a brand loyalty problem; we have a “fix it right” policy. Ask anyone on your street. And if you bring us a written estimate from another company, we’ll give you a free second opinion. $40 off any repair over $200, no trip charge inside the county, and 10% off always for seniors and veterans.
FAQs
Yes, in most cases. Repointing, flashing, crown work, and waterproofing are masonry repairs that don’t touch the Olympia Chimney warranty components. If your repair involves an Olympia Chimney part that’s still under warranty, we’ll recommend OEM replacement parts so the manufacturer can’t use aftermarket parts as an excuse to deny a claim. We’re an independent Olympia Chimney service provider, so we’ll tell you straight if the repair is covered and who to call first. Reach us at (781) 277-4630 and we’ll walk you through it.
Most repointing, flashing, and crown repairs are completed in one day. If we need to order a specific Olympia Chimney part, that adds a few days depending on the supplier. We’ll tell you before you pay a cent when to expect us and how long the repair will take. Call (781) 277-4630 for a confirmed date.
It depends on what the camera shows. If the liner has a few rust spots or a loose seam, we can often repair it. If it’s collapsed, severely warped, or showing cracks along multiple flue tile joints, replacement is usually the honest answer. We’ll show you the camera footage and give you a plain-English verdict - every time, no exceptions. We don’t sell liners you don’t need.
Once a year, burn or no burn. Chimneys break in the off-season too. Quincy’s coastal weather means freeze-thaw cycles start in November and keep going until April. Water gets into tiny cracks, freezes, expands, and widens the crack. By the time you see a stain on the ceiling, the repair is bigger than it needed to be. Annual inspection is cheap. A new crown and flashing job is not.
Written by Wendell Pike, Owner, Top Hat Chimney at Top Hat Chimney, serving Quincy and nearby areas.